Weight, Foot Print and Support

Weight, Foot Print and Support

Desktop equipment 
(Auto Refractor, Non-contact Tonometer, Slit Lamp, Wave Front, Retina Camera, Cornea Topographer and Lensmeters.)
20 - 50 LBS. Equipment must be placed on a stable surface that can support at least 65 LBS. 

Slit Lamps (SL series)
20 - 30 LBS. Slit Lamps on examination unit’s table top or elevation tables

Slitlamps, Cornea550, Retina400 
5(W) x 15(L) Inches 20 ~ 30 lbs

Lensmeters 
10(W) x 10(L) Inches ~ 10 lbs

M700, Octopus 600 
25(W) x 20(L) Inches ~ 24 lbs

Autorefractors, Non-contact tonometer 
15(W) x 15(L) Inches ~25 lbs

WAM700+ 
18(W) x 25(L) Inches ~60 lbs

It is recommended for the customer to have a place available for the new equipment to be installed. 
In case you did not ordered an elevation table it is required for the customer to have space available for the new equipment to be installed.

THE MANUFACTURER AND/OR THE DISTRIBUTOR/RESELLER CAN NOT BE HELD LIABLE UNDER ANY CIRCUMSTANCES IF THE USE TERMS ARE NOT MET.

    • Related Articles

    • Fundus Camera Retina 400 - FAQ

      Question Answer What is the minimum pupil size? 2.2 minimum pupil size How many megapixels is the camera? 5 mp Does it do Anterior Segment imaging? It can be used to photograph External Images -if need detailed Anterior images need a digital camera ...

    • Corneal Topographer Cornea 550

      Question Answer How does it measure topography? Placido Rings (versus cone techno) How many points does it measure? It uses 24 Rings to measure 6144 points (covering all cornea areas) Can I do reports? Yes, there are preset reports and availability ...

    • OPTEC PLUS

      Q: Can we use the OPTEC Plus without Laptop or Tablet or PC A : No, need external device to launch the tests Q: Can I connect my own tablet or laptop with the unit? A: Yes ,the unit can be connected by bluetooth, just need the tablet or laptop or PC ...

    • AKR 550 & AK R750 Auto Kerato - Refractometer

      Problem Possible Causes Suggested Solutions Images are not properly centered - External lights or windows near the unit - Large patches of light near the unit - Ensure that there are no bright lights or windows near the unit or the patient. - Ensure ...

    • Wavefront Aberrometer WAM 700

      Problem Possible Causes Suggested Solutions Images are not properly centered - External lights or windows near the unit - Large patches of light near the unit - Ensure that there are no bright lights or windows near the unit or the patient. - Ensure ...